SurfaPaint ThermoDry Interior Paint

SurfaPaint ThermoDry Interior can be applied directly on interior wall surfaces (concrete, plaster, drywalls), and wherever water based, acrylic paints are applied. New substrates from cement or masonry should have cured for more than 3-4 weeks before application. Preparation: Ensure all surfaces are clean and dry prior to application. Remove any dust and dirt. Very dirty surfaces (damp, nicotine, ink, fungi) should be primed. Application note: Stir well before application. If thinning is required add up to 10% water by volume. Application temperature should be between 8-35 C. Apply 2-3 even coats using a good quality brush, roller or by spraying with a tip of a diameter 1.4mm or more. Do not over-brush. Ensure corners and edges are adequately covered. Additional coats should be applied 4-6 hours after the previous application. Spreading Rate: 10-12 m2/L. Available Packaging: 3L and 10L pails.